Stone Installation in Outaouais & Cantley
Stone installation is masonry work, and it is what we do. Maçonnerie J.Légaré sets natural and decorative stone on walls, facades, chimneys and fireplaces for homeowners in Outaouais and Cantley. Tell us about your project and we come look at the wall.
RBQ 5867-6305-01
Residential Stone Installation in Outaouais & Cantley
Maçonnerie J.Légaré installs stone as part of residential masonry construction and repair. That means walls, facades, entrances, chimneys and fireplaces — stone set with mortar over a prepared masonry backing.
Our address is in Cantley and we work across the Outaouais region. Homeowners in Cantley and the Outaouais call us both for new stonework on a home or addition and for stone that has to be reset, repointed or replaced.
Stone rarely stands alone on a project. It sits beside brick, concrete block and parging, and each material has its own joints and its own mortar. Because our whole trade is masonry, the same crew handles all of it, from the backing to the final joints. Our licence is registered under RBQ 5867-6305-01.
Our Stone Installation & Masonry Services
Here is what we do for homeowners in Outaouais and Cantley. Every item is masonry work on a residential building.
Stone installation
Natural or decorative stone laid on walls, facades, entrances, chimneys and fireplaces.
Brick installation
Brick walls and veneers on homes and additions, with joints matched to the existing masonry.
Masonry and crack repair
Cracks corrected in stone, brick, block and parging, and worn mortar joints repointed.
Chimneys and fireplaces
Masonry work on chimneys and fireplaces in stone, brick or block, indoors and outdoors.
Concrete block work
Concrete blocks laid or repaired, often as the base behind a stone or brick finish.
Stucco / parging
New parging and parging renewal to even out a masonry surface or replace a worn finish.
Brick wall stabilization
Masonry ties installed when a brick wall pulls away from its backing.
Related pages: masonry contractor in Cantley & Outaouais, masonry repair and fireplace and chimney masonry.
Our Stone Installation Process
A fireplace surround and a full facade follow the same sequence, so you always know what stage the work is at.
- 01
Assessment of the wall or structure
We look at the surface that will carry the stone, along with its condition and layout.
- 02
Material selection
We go through the stone options with you and pick the mortar that suits the material and the wall.
- 03
Preparation
The area is cleared and protected, and the backing is made ready to receive the stone.
- 04
Stone installation
Stone is set course by course, keeping the coursing, alignment and joint width consistent.
- 05
Finishing
Joints are struck and cleaned, the work is reviewed with you and the site is left tidy.
We look at the masonry before describing the scope, because the wall itself decides much of the work. The quote lists what is planned, and you decide whether to proceed.
Why Homeowners Choose J.Légaré Masonry
Masonry is our only trade, with a specialization in residential repair and restoration. That focus shapes how we install stone: the coursing, the joint width and the mortar are chosen so new work sits naturally against the existing masonry.
We work locally, from Cantley across the Outaouais, which keeps site visits and follow-ups simple. You deal directly with the mason on the job, not a middle layer.
Because we also repair, we can tell you when a wall needs attention before new stone goes on it. Our licence is registered under RBQ 5867-6305-01.
Serving Outaouais & Cantley
We serve homeowners in Outaouais and Cantley. Many homes here carry older brick and stone masonry, and local winters are hard on joints and finishes — freeze and thaw cycles show up first in the mortar.
If your address sits elsewhere in the Outaouais, write it in the quote form. We confirm whether the area is covered before scheduling a visit.
Recent Stone & Masonry Work
Two examples of stone masonry: an outdoor stone fireplace, and an interior stone feature wall.
Frequently Asked Questions (FAQ)
What does stone installation for a home involve?
We set natural or decorative stone as masonry on a home: exterior walls, facades, entrances, chimneys and fireplaces. The stone is laid with mortar over a prepared masonry backing, course by course.
Can stone be installed on an existing brick wall?
In many cases yes, depending on the condition of the existing masonry. We look at the wall first, check the joints and the backing, and tell you what the surface can carry.
Do you repair cracked or damaged masonry and stonework?
Yes. Masonry and crack repair is a core part of our work. We reset or replace damaged stone units, repoint worn mortar joints and correct cracks in stone, brick, block and parging.
Do you serve Cantley and other areas of Outaouais?
Yes. Our address is in Cantley and our service area is the Outaouais region. Add the job address to the quote form and we confirm whether the area is covered before a visit.
How do I request a quote for a stone installation project?
Fill out the quote form on this page or call us at 819 592-7335. Describe the wall or the project and give the job address. We come see the masonry, then send you a quote describing the planned work.
Get Your Free Stone Installation Quote
Stone installation on a wall, a facade, a chimney or a fireplace starts with a look at the masonry. We assess the surface and send you a clear quote. We serve homeowners in Outaouais and Cantley. Call 819 592-7335 or fill out the quote form on this page.